WPS heats widely and comfortably like the sunlight due to its wide panel and far-infrared which penetrates evenly on and into surfaces.
 |
 |
 WPS heat wide area from side to side. |
 |
 Surface temperature of typical electric heater is approximate 750℃ but WPS's is approximate 300℃ which is the most efficient for radiation efficiency of the far-infrared ray. WPS's lower surface temperature can minimize the risk for fire or serious injury. |
 The temperature of front guard is approximate 50℃ to 90℃. Body's is less than 50℃ |
Because of NO smell, NO wind and NO noise, WPS heater is suitable for various application such as office, showroom, electric and electronic factories or food factories, etc.
Converting whole heating into partial heating
Without exception, heated air by air conditioners or forced air heaters goes to ceiling. Thus these would not be able to warm people or objects that are close to the floor effectively or economically. Meanwhile, WPS puts heat precisely when and where you need it.
WPS emit much far-infrared ray efficiently. Partial heating with Far-infrared heater WPS enables energy-saving heating.
 |
 |
 |
 |
 |
 |
Other features
|
Safe and usability control panel
 Safety devices such as tip-over, power shutdown and over heat protection are equipped as standard. |
Variable radiation direction
 Angle adjustment is possible between upper 15 degrees and lower 5 degrees.
|
Easy transport
 Equipped with large casters for easy transportation |
Specification & Dimension
 |
 (mm) |
| Model | WPS-20 |
WPS-30 |
|---|---|---|
| Power source | 230V |
|
| Power consumption | 2.0kW |
3.0kW |
| Current rating | 9A |
13A |
| Operating temperature limit | -10℃ to 20℃ |
|
| Dry weight | 25.6kg |
|
| Power cable | 3m |
|
| Safety devices | Tip-over switch: | When the heater topples to the ground or gets a high impact, it shuts down automatically. |
|---|---|---|
| Power shutdown: | When the power supply is restored after it shuts down during operation because of blackout or other reason, in order to avoid a fire the heater can not restart automatically even if the operation switch still remains "ON". | |
| Overheated protection: | When the heater overheats, it shuts down automatically. | |
| Fuse: | This shuts off the power supply when excessive electric current passes through due to irregular trouble of the devices. |
